Frequently asked questions and answers

The technical lifespan of the fabric is approximately 25-30 years.

The PMH Hall can be insulated to great effect. See Climathall.

The fabric does not provide any significant protection against break-ins. If you do not have a fenced-in area, we recommend a Combihall with sheet metal cladding on the sides.

The long side cannot be opened as the frame comes down here. This is possible on the gable end. See Protecthall.

The roof should not be accessed without appropriate safety equipment that is securely anchored. If in doubt, seek professional assistance. Contact our installation/service department by phone at 0411-13800.

Maintenance is minimal on a PMH Hall. The fabric tensioning technology with tensioning screws means that retensioning is rarely necessary. However, after a storm, you should check that the wind braces are still tensioned.

- If you are located within a detailed planning area, a building permit is required. We can assist you with drawings and other documentation required for the building permit application. - You can find certified inspectors in your area on the Boverket website.

There is a risk of condensation in all cold storage facilities, so we recommend that the warehouse be dehumidified when storing moisture-sensitive materials. See Dry Air Storage.

We install the insulation on the inside! With the insulation on the inside of the frames, it is better protected and retains its insulating function. Insulation placed on the outside can be compressed by snow loads and lose its insulating capacity. Ours does not. Our insulation on the inside will not be destroyed if an accident occurs and you get a hole or tear in the fabric. If the insulation is placed in the outer fabric, water (entering through the damaged fabric) will get into the insulation and significantly reduce its insulating capacity. Ours does not.

Installation is always included and is carried out by professional, trained installers.

Normally, an asphalt surface is what we need to anchor the storage hall. It can also work on a well-compacted gravel surface. We would be happy to visit you to inspect the conditions.

PMH-Hallen can be purchased, leased, and certain sizes can be rented. Read more about it here.

Standard widths (cantilevered) for the PMH Hall are 8, 10, 12, 15, 18, 20, 24, 26, 30, 36, and 40 m. Other widths are available upon request. The PMH Hall is constructed in 4-meter sections lengthwise.

The PMH Hall is dimensioned according to European Construction Standards (ECS) and the Swedish National Board of Housing, Building and Planning's regulations. The input values are the snow and wind loads determined for each municipality.

The frame of the PMH Hall is CE marked and manufactured in accordance with EN-1090-2 by certified workshops.

There is no price list as PMH-Hallen is customized and there are many options to choose from. We calculate each individual item.

Minor tears can be repaired with special glue. Larger tears can be repaired by heat welding the fabric together. We offer professional assistance if required. Contact our installation/service department on +46 (0)411-13800.

Avoid using strong chemicals when cleaning. High-pressure washing with warm water is usually sufficient.

Renting a tent hall offers several advantages, including flexibility in terms of usage time and adaptation to needs. Renting eliminates the need for large capital investments and maintenance costs. In addition, renting tent halls can be cost-effective for temporary or short-term projects and provides the opportunity to try out and adapt the size and equipment before making a possible purchase.

Yes, an insulated tent hall is useful for storing moisture-sensitive materials. The insulated construction helps to control humidity levels and reduce the risk of condensation, which protects moisture-sensitive materials and preserves their quality.

The price of a tent hall is influenced by several factors, including the dimensions of the tent hall, its geographical location, customization and special features, equipment and accessories, as well as assembly and installation. The size of the tent hall plays a role, as larger halls require more materials and labor. Geographical location can affect transportation costs and any permits that may be required. Customizations and special features may incur additional costs. Equipment and accessories included may also affect the price. Finally, the cost of assembly and installation may vary depending on the complexity of the project.

Yes, it is possible to heat and insulate a tent hall. The interior of the hall can be lined with an insulated inner fabric that is attached to the inside of the steel frame. This provides a secure solution that maintains its insulating function. An insulated tent hall is ideal for storing and protecting goods from temperature changes and moisture, which is important for preserving the quality and shelf life of the goods. The insulated inner fabric helps to maintain a consistent temperature and prevents condensation, which reduces the risk of damage to stored products.

When installing a tent hall within a detailed planning area, a building permit is normally required. There are different types of building permits depending on whether the tent hall is temporary or permanent. To facilitate the process, we offer free assistance with the necessary documentation, such as drawings, certificates, and control plans. Once the building permit has been granted, we can also assist with consultation prior to technical consultation and inspection prior to the final decision to ensure that everything runs smoothly.

When purchasing a tent hall, we need to know the snow load zone to ensure that the structure is designed to withstand the snow load that may occur in the geographical area. The snow load zone defines the maximum amount of snow that is expected to fall on an area during a certain period of time. By taking the snow load zone into account, we can choose the right dimensions for the tent hall and its structures to guarantee its safety and stability.

Choosing an insulated tent hall offers the advantage of being able to control and maintain a stable temperature inside the hall. This protects stored goods from temperature variations and moisture, which is crucial for preserving the quality and shelf life of the goods. Insulated tent halls also reduce the risk of condensation.

The tent fabric has been specially developed to retain its function and aesthetic appearance year after year. With correct use and appropriate maintenance, the tent fabric can have a technical lifespan of approximately 25–30 years. This means you can rest assured that your tent will continue to perform well and maintain its visual quality for a long time to come.

Our tent halls can be purchased, leased, or rented. Contact us for more information.

All our tent halls are manufactured in accordance with EN-1090-2, dimensioned according to European construction standards (EKS), and designed in accordance with the Swedish National Board of Housing, Building and Planning's regulations (BBR).

A tent hall usually requires very little maintenance under normal conditions. Our unique fabric tensioning technology with tensioning screws minimizes the need for re-tensioning. However, after extreme weather conditions such as a storm, you should check that the cross braces are still tensioned.

A tent hall can only be opened up completely on the gable side. This is not possible on the long sides, as the frame extends down there. However, gates and doors can be installed on the long sides.

A tent hall is usually anchored on an asphalt surface, but can also be used on a well-compacted gravel surface. To be sure that your surface is suitable for a tent hall, please contact us.

The frames of our tent halls are CE marked and manufactured in accordance with EN-1090-2 by certified workshops. With PMH-Hallen, you can be sure that your tent hall complies with the latest standards for workmanship and inspection.

Our tent halls are often used in the mining industry as storage facilities for spare parts and other necessary materials, but also as machine parks to protect mining machinery such as trucks, tractors, and drilling rigs. A tent hall can also be used as temporary storage for hazardous waste generated by mining operations, such as chemicals and contaminated water.

The fabric does not provide any significant protection against break-ins. If the tent hall is not located in a fenced-in area, we recommend a tent hall with metal-clad sides to increase protection against break-ins.

To ensure that your tent hall has a long service life and continues to function optimally for many years to come, it is important to carry out preventive maintenance. This can be done independently using the operating and maintenance instructions that come with your PMH Hall. If you need help with maintenance, we are happy to assist you.

We offer service agreements where we make service visits to ensure that your tent hall continues to function optimally. Our experienced service technicians help identify any problems and address them before they develop into more serious issues. By choosing a service agreement, you can rest assured that your hall is always in good hands and that we will take care of any problems that may arise.

We always deliver our tent halls as quickly as possible. There are several factors that affect the delivery time for a tent hall. The factors that affect the delivery time of a tent hall are weather, customised design, dimensions, area of use and assembly. Delivery time is usually 10 weeks or less.

The price per square meter of tent halls can vary for several reasons. The price per square meter of our tent halls is based on several factors, such as the dimensions of the tent hall, its geographical location, customization, equipment, and assembly. For a more accurate price quote, please contact us.

Renting a storage tent offers several advantages, including flexibility in terms of usage time and adaptation to needs. Renting eliminates the need for large capital investments and maintenance costs. In addition, renting a storage tent can be cost-effective for temporary or short-term projects and allows you to try out and adapt the size and equipment before making a possible purchase.

Yes, an insulated storage tent is very useful for storing moisture-sensitive materials. The insulated design helps to control humidity levels and reduces the risk of condensation, which in turn protects moisture-sensitive materials and preserves their quality. By creating an environment with stable temperature and humidity levels inside the storage tent, you can safely store materials that are sensitive to moisture and avoid potential damage or deterioration of the material. An insulated storage tent is therefore an excellent solution for ensuring that your moisture-sensitive materials are stored under optimal conditions.

The price of a storage tent is influenced by several factors, including the size of the tent, geographical location, customizations and special features, equipment and accessories, as well as assembly and installation. The size of the storage tent plays a role, as larger tents require more materials and labor. Geographical location can affect transportation costs and any permits that may be required. Customizations and special features may incur additional costs. Equipment and accessories included can also affect the price. Finally, the cost of assembly and installation can vary depending on the complexity of the project.

Yes, it is possible to heat and insulate a storage tent. The inside of the tent can be lined with an insulated inner fabric that is attached to the inside of the tent frame. This provides a reliable solution that maintains its insulating function. An insulated storage tent is perfect for storing and protecting goods from temperature variations and moisture, which is crucial for preserving the quality and shelf life of the goods. The insulated inner fabric helps maintain a consistent temperature and prevents condensation, reducing the risk of damage to the stored products. By heating and insulating the storage tent, you can create an optimal environment to ensure that your stored goods remain high quality and are protected from adverse weather conditions.

When installing a storage tent within a detailed planning area, a building permit is normally required. There are different types of building permits depending on whether the storage tent is temporary or permanent. To facilitate the process, we offer free assistance with the necessary documentation, such as drawings, certificates, and control plans. Once the building permit has been granted, we can also assist with consultation prior to technical consultation and inspection prior to the final decision to ensure that everything runs smoothly. Our goal is to make the building permit process as simple and efficient as possible for our customers when installing a storage tent.

Knowing the snow load zone when purchasing a storage tent is crucial to ensure that the structure is adapted to withstand the snow load that may occur in the geographical area. The snow load zone defines the maximum amount of snow that is expected to fall on an area during a given period of time. By taking the snow load zone into account, we can choose the right dimensions for the storage tent and its structures to guarantee safety and stability.

Choosing an insulated storage tent has the advantage of allowing you to control and maintain a stable temperature inside the tent. This helps to protect the stored goods from temperature variations and moisture, which is crucial for preserving the quality and shelf life of the goods. Insulated storage tents also reduce the risk of condensation, which can be harmful to the stored material. By investing in an insulated storage tent, you can create an optimal environment to protect your goods and ensure that they remain in the best possible condition.

The storage tent fabric is specially designed to retain its functionality and aesthetic appearance for many years to come. By using the storage tent correctly and performing regular maintenance, you can expect a technical service life of approximately 25–30 years. This means you can feel confident that your storage tent will continue to perform reliably and maintain a high visual quality for a long time to come.

Vårta storage tents can be purchased, leased, or rented. Contact us for more information.

All our storage tents are manufactured in accordance with EN-1090-2, dimensioned according to European construction standards (EKS), and designed in accordance with the Swedish National Board of Housing, Building and Planning's regulations (BBR).

A storage tent is easy to maintain under normal conditions. Our innovative fabric tensioning technology, which uses tensioning screws, means that retensioning is rarely necessary. However, in extreme weather conditions, such as a storm, it is recommended that you check that all tensioning screws are still tight.

A storage tent can only be opened completely at the gable end, not on the long sides. However, various types of doors can be installed on the long sides to improve access.

A storage tent is usually anchored on an asphalt surface, but can also be used on a well-compacted gravel surface. To ensure that your surface is suitable for a storage tent, please contact us.

Storage tents from PMH-Hallen have frames that are CE marked and manufactured by certified workshops in accordance with EN-1090-2. PMH-Hallen is your storage tent supplier if you want to be sure that your storage tent complies with the latest standards for workmanship and inspection.

Storage tents are very useful in many areas of the mining industry. They can be used as storage space for materials and spare parts needed to keep operations running, and storage tents can also be used to protect machinery used in the mine, such as trucks, tractors, and drilling rigs.

The canvas does not provide any significant protection against intrusion. If your storage tent is not located in a restricted area and requires extra security, we recommend using a storage tent with metal sides.

To ensure that a storage tent lasts a long time and functions optimally for many years to come, it is important to carry out preventive maintenance. By following the operating and maintenance instructions that come with your PMH Hall, you can do this yourself. If you need help with maintaining your storage tent, simply contact us.

To ensure that your storage tent functions optimally, we offer service agreements. This means that our professional service experts will visit you to detect any problems at an early stage and resolve them before they become serious. With a service agreement, you can rest assured that your storage tent is always in good hands and that we will handle any problems that may arise.

We deliver all our storage tents as quickly as possible. There are many factors that affect the delivery time for a storage tent. Factors that can affect delivery time include weather, customised design, size, area of use and assembly. The delivery time for a storage tent is usually 10 weeks or less.

The price per square meter for storage tents varies depending on several factors. Our storage tent prices are calculated based on a number of variables, such as size, geographical location, customizations, equipment, and assembly. If you would like a more accurate price, please contact us.